Home > Controller and Power Supply >

T1000S Digital LED Controller

Product Categories

NEWSTAR LED CO., LIMITED

Contact Now

T1000S Digital LED Controller

Place of Origin : China

MOQ : 10

Price : welcome to inquiry

Certification : CE&RoHs

Contact Now

T1000S Digital LED Controller:

1.can control 2048 pixel

2.DC5V/DC7.5V-24

3.led string, strip, pixel led

4. LEDEditor software

T1000S Digital LED Controller:
1. 256 Gray,Gamma correction processing software.
2. Support the rules and special-shaped handle.
3. Controller, a port output, may bring 1024/2048 light.
4. Off-line control, play back content stored in the SD card
5. T-1000C store a maximum of 16 documents

Video: https://www.youtube.com/watch?v=JWOI-ehVvXs

Support IC type	Module in LedEdit software	Pixel numbers	remark
LPD6803,D705,1101,6909, 6912	T-1000-6803	2048 pixel
LPD8806,LPD8809	T-1000-8806	2048 pixel
TM1803,TM1804,TM1809,TM1812	T-1000-TM	2048 pixel	TM1804 and TM1809 low speed and high speed
TM1903TM1904TM1909TM1912	T-1000-TM19	2048 pixel
UCS6909UCS6912UCS7009UCS5903	T-1000-UCS-32	2048 pixel
UCS1903UCS1909UCS1912	T-1000-UCS-256	2048 pixel	low speed and high speed
UCS3903	T-1000-UCS-1024	2048 pixel
DMX512	T-1000-DMX	170/512 pixel	Compatible DMX512
WS2801,WS2803	T-1000-WS	2048 pixel
WS2811	T-1000-WS2811	2048 pixel	low speed and high speed
DS189	T-1000-DS189	2048 pixel
TLS3001,TLS3002TLS3008	T-1000-TLS	* pixel
P9813	T-1000-P9813	2048 pixel
SM16715	T-1000-SM16715	2048 pixel	low speed and high speed
SM16716	T-1000-SM16716	2048 pixel
BS0901,BS0902	T-1000-0901	2048 pixel
BS0815	T-1000-0815	2048 pixel

Note:
Controller on the SD card can not be hot-swappable, plug the SD card every time, you must first disconnect the power supply controller

Question 1: After power, the T-1000 ERROR indicator has been flashing without display output
Answer: The ERROR indicator has been flashing means the controller did not read the card correctly, possible problems:
a .SD card is empty, with no effect file
b .The effect file in the SD card and the controller model are not match, please choose correct controller model in LedEdit and then re-create the effect file led
c .SD card did not format to FAT before copy effect files
d .Please check the supply power voltage, the controller can be individually powered to exclude power reasons
f .Changing the SD card and then test to exclude the possibility of a bad SD card

Question 2: The controller is powered on, the indicator is normal, but no effect change in lighting
Answer: The reasons for this are as follows:
A. Check if the lighting′s signal line and the controller connected correctly
B.If the TTL signal is received, the lamp and the controller must be common ground, that means connect the lighting′s and the controller′s ground together
C.check if the model chose during making display files on the SD card match the chips used in the lighting

China T1000S Digital LED Controller wholesale

T1000S Digital LED Controller Images

Inquiry Cart 0

Send your message to this supplier


*From:	Your email address is incorrect!
*To:	NEWSTAR LED CO., LIMITED
*Subject:	Subject is empty!
*Message:	For the best results, we recommend including the following details: -Self introduction -Required specifications -Inquire about price/MOQ Characters Remaining: (0/3000) Please enter 20 to 3000 characters to contact this supplier!